Custom Machined Screws - Machined Hardware Source https://www.machinedhardwaresource.com/portfolio-category/custom-made-machined-modified-screws/ Custom machined fasteners and hardware - custom nuts, custom standoffs, custom spacers, custom pins, and much more Mon, 06 Nov 2023 19:35:56 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.3 194122541 Custom Metric Hex Key Double Thread Studs https://www.machinedhardwaresource.com/portfolio/custom-metric-hex-key-double-thread-stud-factories/ Mon, 06 Nov 2023 19:35:56 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5224 The post Custom Metric Hex Key Double Thread Studs appeared first on Machined Hardware Source.

]]>

These custom metric hex key double thread studs were manufactured domestically for our automotive customer using alloy steel material meeting 220,000 psi clamp load minimum. M12 thread was rolled on both sides, with fine pitch on the longer side and coarse on the other. 1/4″ hex drive was formed on one side extending .25″ from the fine threaded section. Full certs were provided with the parts.

The post Custom Metric Hex Key Double Thread Studs appeared first on Machined Hardware Source.

]]> 5224 Custom Inconel 718 Double Thread Offset Aerospace Bolts https://www.machinedhardwaresource.com/portfolio/custom-inconel-718-double-thread-offset-aerospace-bolts/ Mon, 16 Oct 2023 19:04:02 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5221 The post Custom Inconel 718 Double Thread Offset Aerospace Bolts appeared first on Machined Hardware Source.

]]>

Custom custom Inconel 718 double thread offset studs were manufactured for our aerospace customer. The offset head, double thread, and hardness of material made these parts extremely difficult to manufacture. The head radius measured .203″ and a combination of 5/16-24 2A and 1/4-28 2A thread was cut to a length of .842″. Definitely one of the toughest parts we have dealt with – the hardness of the material created countless issues with tool life. Full certs with FAIR were provided with the parts.

The post Custom Inconel 718 Double Thread Offset Aerospace Bolts appeared first on Machined Hardware Source.

]]> 5221 Custom Socket Drive Partially Threaded Electronics Studs https://www.machinedhardwaresource.com/portfolio/custom-socket-drive-partially-threaded-electronics-studs/ Mon, 10 Jul 2023 19:14:29 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5197 The post Custom Socket Drive Partially Threaded Electronics Studs appeared first on Machined Hardware Source.

]]>

We supplied these custom socket drive partially threaded studs to our electronics customer in 316 stainless steel material with plain finish. A cold formed socket 3MM hex drive was incorporated on the threaded side and M6-1.0 thread was rolled to a length of 26MM. The unthreaded side measures 19MM in length and 4MM in diameter with slightly chamfered corners.

The post Custom Socket Drive Partially Threaded Electronics Studs appeared first on Machined Hardware Source.

]]> 5197 Custom 316 Stainless Double Thread Studs – Left Hand & Right Hand https://www.machinedhardwaresource.com/portfolio/custom-316-stainless-double-thread-studs-left-hand-right-hand/ Fri, 29 Jul 2022 19:01:58 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5170 The post Custom 316 Stainless Double Thread Studs – Left Hand & Right Hand appeared first on Machined Hardware Source.

]]>

These custom 316 double thread studs were manufactured domestically using 316 stainless steel material, with a combination of 1/4-28 right hand thread, 1/4-28 left hand thread, 3/8-24 right hand thread, and 10-32 right hand thread with specific tight tolerance machined shoulders specified for each part. Material certs and certificate of conformance were provided with the parts and the thread was cut rather than rolled for these parts to allow a quicker turnaround.

The post Custom 316 Stainless Double Thread Studs – Left Hand & Right Hand appeared first on Machined Hardware Source.

]]> 5170 Custom 17-4 Stainless Steel Shoulder Screws https://www.machinedhardwaresource.com/portfolio/custom-17-4-stainless-steel-shoulder-screw-manufacturers/ Mon, 18 Jul 2022 21:17:37 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5162 The post Custom 17-4 Stainless Steel Shoulder Screws appeared first on Machined Hardware Source.

]]>

These custom 17-4 stainless steel shoulder screws were manufactured using DFARS compliant material for our defense customer, with MIL-DTL-13924D black oxide finish and heat treat to condition 1025. M3 X 0.50 thread was incorporated at a length of 4.06MM and the shoulder measured 3MM in diameter by 24.5MM. The head incorporated an aggressive diamond knurl and a broached 6-lobe drive. Full certs with a FAIR were provided with the parts.

The post Custom 17-4 Stainless Steel Shoulder Screws appeared first on Machined Hardware Source.

]]> 5162 Custom Large Metric 12.9 Socket Head Bolts – M90 X 495MM https://www.machinedhardwaresource.com/portfolio/custom-large-metric-12-9-socket-head-bolts-manufacturers/ Thu, 11 Nov 2021 20:54:36 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5126 The post Custom Large Metric 12.9 Socket Head Bolts – M90 X 495MM appeared first on Machined Hardware Source.

]]>

These are custom large metric class 12.9 socket head bolts manufactured domestically for our utilities customer at 92 pieces. M90 X 4 thread was incorporated at thread length of 120MM. The shoulder dimeter was set to 84.3MM at a length of 290MM.  The 75MM socket drive was broached with a 10MM diameter hole drilled in the center to a depth of 385″ from the top of the head.

The post Custom Large Metric 12.9 Socket Head Bolts – M90 X 495MM appeared first on Machined Hardware Source.

]]> 5126 Custom 6-Lobe (Torx Alternative) Shoulder Screws in 416 Stainless Steel https://www.machinedhardwaresource.com/portfolio/custom-6-lobe-torx-alternative-shoulder-screw-factories/ Thu, 28 Oct 2021 15:33:16 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5122 The post Custom 6-Lobe (Torx Alternative) Shoulder Screws in 416 Stainless Steel appeared first on Machined Hardware Source.

]]>

We had these custom 6-lobe shoulder screws manufactured in 416 stainless steel in the USA for our electronics customer. DFARS compliant material was used and the parts were heat treated to achieve 26-32 RC. The 6-lobe drive (T10 size) was made using a combination of broaching and punch, allowing us to bypass cold forming that carries a much longer lead time in our current conditions. The shoulder measures .13″ X .500″ in length and the threaded portion is #4-40 with a minimal undercut. Full certs were included with the parts per our customers requirements.

The post Custom 6-Lobe (Torx Alternative) Shoulder Screws in 416 Stainless Steel appeared first on Machined Hardware Source.

]]> 5122 Custom Metric 316 Stainless Shoulder Bolts https://www.machinedhardwaresource.com/portfolio/custom-metric-316-stainless-shoulder-screw-manufacturers/ Wed, 22 Sep 2021 19:58:09 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5118 The post Custom Metric 316 Stainless Shoulder Bolts appeared first on Machined Hardware Source.

]]>

We had 24,000 pieces of these custom metric 316 stainless shoulder bolts manufactured for our design and construction customer. The shoulder measured 4MM by 3MM and M3 X 0.5MM thread was incorporated at 5MM in length, including the relief shoulder transition. Head diameter was at 6MM and a 2MM hex socket drive was cold formed.

The post Custom Metric 316 Stainless Shoulder Bolts appeared first on Machined Hardware Source.

]]> 5118 Custom Countersunk Double End Studs – 304 Stainless Steel https://www.machinedhardwaresource.com/portfolio/custom-countersunk-double-end-stud-manufacturers/ Mon, 23 Aug 2021 20:30:48 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5115 The post Custom Countersunk Double End Studs – 304 Stainless Steel appeared first on Machined Hardware Source.

]]>

We had 5,000 pieces of these custom countersunk double end studs manufactured for our customer that specializes in frozen drink equipment production. 304 stainless steel material was used and the thread was cut on both sides. Overall length was 41.66MM +/- 0.5 and both threaded sides incorporated 5/16-18 2A thread, at 10.16MM and 15.24MM in length accordingly. At the maximum diameter point the countersunk shoulder reaches 11.18MM +/-0.2.

The post Custom Countersunk Double End Studs – 304 Stainless Steel appeared first on Machined Hardware Source.

]]> 5115 Custom Extended Dog Point Set Screws https://www.machinedhardwaresource.com/portfolio/custom-extended-dog-point-set-screw-factories/ Thu, 08 Jul 2021 20:36:25 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5102 The post Custom Extended Dog Point Set Screws appeared first on Machined Hardware Source.

]]>

These custom extended dog point set screws were manufactured using 4140 alloy steel material with zinc clear finish.  6-32 thread was rolled at .150″ in length and a 1/16″ hex socket drive was incorporated.  Overall length measured .45″ and the dog point diameter was set to .097 +/- .001″.  Production lead time was 12 weeks from confirmed order and full certs were available upon request.

 

The post Custom Extended Dog Point Set Screws appeared first on Machined Hardware Source.

]]> 5102