Custom Hex & Lock Nuts - Machined Hardware Source https://www.machinedhardwaresource.com/portfolio-category/custom-hex-nylon-machined-lock-nuts/ Custom machined fasteners and hardware - custom nuts, custom standoffs, custom spacers, custom pins, and much more Tue, 20 Sep 2022 18:22:46 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.3 194122541 Custom A286 Stainless Steel Castle Nuts https://www.machinedhardwaresource.com/portfolio/custom-a286-stainless-steel-castle-nut-factories/ Tue, 20 Sep 2022 18:22:46 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5178 The post Custom A286 Stainless Steel Castle Nuts appeared first on Machined Hardware Source.

]]>

These are DFARS compliant custom A286 stainless steel castle nuts manufactured domestically in the USA for our aerospace customer. They incorporate 7/16-26 2A thread and internal diameter of .328 +/- .005″. The cross slots measure .090 +/-.005″ and unthreaded shoulders both measuring .394″+0.000/-.004 in diameter by .063″ +/-.01. Full certs including a FAIR are required as a part of the deliverable package.

The post Custom A286 Stainless Steel Castle Nuts appeared first on Machined Hardware Source.

]]> 5178 Custom Precision Drilled Hex Nuts – 5-40 Thread https://www.machinedhardwaresource.com/portfolio/custom-precision-drilled-hex-nuts-factories/ Wed, 20 Jul 2022 16:56:20 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5164 The post Custom Precision Drilled Hex Nuts – 5-40 Thread appeared first on Machined Hardware Source.

]]>

These custom precision drilled hex nuts were manufactured domestically in the USA using DFARS compliant 303 stainless steel material with NADCAP certified passivation per AMS QQ-P-35. Internal 5-40 2B thread fit was incorporated and two corners drilled at a .026 +/- .005″ diameter. Outside dimensions are 7/32″ across the flats and .244″ across corners. Full paperwork was provided with the parts.

The post Custom Precision Drilled Hex Nuts – 5-40 Thread appeared first on Machined Hardware Source.

]]> 5164 Custom Precision Cam Nuts – Mild Steel With Zinc Plating https://www.machinedhardwaresource.com/portfolio/custom-precision-cam-nuts-mild-steel-factories/ Tue, 15 Feb 2022 21:46:24 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5140 The post Custom Precision Cam Nuts – Mild Steel With Zinc Plating appeared first on Machined Hardware Source.

]]>

We had 12,000 pieces of these large custom precision cam nuts manufactured in mild steel for our construction component manufacturer. Overall length measured 91.7MM and max OD at the base was set to 23.88MM. M8 X 1.25 6g thread was incorporated on both sides and M12 X 1.75 6h thread was tapped in the center of the base. Both shoulders were tuned to a 13.37-13.48MM diameter. Material certs and certificate of conformance was provided with the parts.

The post Custom Precision Cam Nuts – Mild Steel With Zinc Plating appeared first on Machined Hardware Source.

]]> 5140 Custom 4140 Precision 10-24 Nuts – AISI 4140 Material With Plain Finish https://www.machinedhardwaresource.com/portfolio/custom-4140-precision-10-24-nuts-aisi-4140/ Sun, 08 Mar 2020 21:44:01 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5042 The post Custom 4140 Precision 10-24 Nuts – AISI 4140 Material With Plain Finish appeared first on Machined Hardware Source.

]]>

We supplied our defense customer with these custom 4140 precision 10-24 nuts after getting an initial sample run completed and tested. Tight tolerances were required on these parts, with most dimensions at +.000/-.005 or +.000/-.003 inches. Overall thickness of the nuts was set at .155″ and 10-24 class 2B thread tapped all the way through. Full production of this part was at 20,000 pieces and lead time at approximately 75-90 days from order confirmation.

The post Custom 4140 Precision 10-24 Nuts – AISI 4140 Material With Plain Finish appeared first on Machined Hardware Source.

]]> 5042 Custom Flange Nuts In 17-4PH Stainless Steel Material https://www.machinedhardwaresource.com/portfolio/custom-flange-nuts-in-17-4ph-stainless-steel/ Tue, 03 Sep 2019 21:39:18 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=5009 The post Custom Flange Nuts In 17-4PH Stainless Steel Material appeared first on Machined Hardware Source.

]]>

These custom flange nuts were manufactured domestically using 17-4PH stainless steel material with 10-24 internal thread.  Overall height of the flange nut was .19″ +/-.01″ and the diameter of the flange was a critical dimension at .330″ +.000/-.015″.  The hex was set to .250″ +.000/-.005″ across the flats.  Our internal part number is NRNS-10-117-4 and typical lead time for full production is 6-8 weeks from order confirmation.

The post Custom Flange Nuts In 17-4PH Stainless Steel Material appeared first on Machined Hardware Source.

]]> 5009 Custom Coupling Nuts With Nylon Patch – 5/16-18 X 1.5″ https://www.machinedhardwaresource.com/portfolio/custom-coupling-nuts-with-nylon-patch/ Fri, 21 Jun 2019 21:04:54 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=4988 The post Custom Coupling Nuts With Nylon Patch – 5/16-18 X 1.5″ appeared first on Machined Hardware Source.

]]>

We had 10,000 pieces of these custom coupling nuts with nylon patch produced for our customer using 18-8 stainless steel material with partial internal thread.  The drilled hole depth was at 19MM max and 16MM of that depth was to be threaded.  Across the flats measures .500″ and overall length at 1.5″.  The undrilled side required a 45 degree chamfer resulting in a .40″ diameter round base.  Nylon patch was applied at 180 degrees after the first 2 threads.

The post Custom Coupling Nuts With Nylon Patch – 5/16-18 X 1.5″ appeared first on Machined Hardware Source.

]]> 4988 AN924-16D Anodized Aluminum Panel Nuts https://www.machinedhardwaresource.com/portfolio/an924-16d-anodized-aluminum-panel-nuts/ Tue, 16 Apr 2019 22:38:15 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=4938 The post AN924-16D Anodized Aluminum Panel Nuts appeared first on Machined Hardware Source.

]]>
Engineered Source has been supplying its loyal Aerospace clientele NAS and MS parts like this AN924-16D bulkhead anodized aluminum nut for over two decades.  Any paperwork required by our customer is obtained and many of the parts supplied we stock and release based on blanket purchase agreements managed throughout the year.

The post AN924-16D Anodized Aluminum Panel Nuts appeared first on Machined Hardware Source.

]]> 4938 Custom Machined Coupling Nut Made to Print In Aluminum Material https://www.machinedhardwaresource.com/portfolio/custom-machined-coupling-nuts/ Wed, 03 Apr 2019 17:11:52 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=4906 The post Custom Machined Coupling Nut Made to Print In Aluminum Material appeared first on Machined Hardware Source.

]]>

This is a custom 6535AX coupling nut made for our aerospace customer to print using aluminum material.  Physical and chemical material certs are provided with the parts and they are produced domestically within the United States.  We stock this recurring part for our customer and release the parts as needed throughout the year.

The post Custom Machined Coupling Nut Made to Print In Aluminum Material appeared first on Machined Hardware Source.

]]> 4906 Custom 1/72 Hex Machine Screw Nut Made to Print https://www.machinedhardwaresource.com/portfolio/custom-1-72-hex-machine-screw-nut-made-to-print/ Wed, 03 Apr 2019 16:49:13 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=4898 The post Custom 1/72 Hex Machine Screw Nut Made to Print appeared first on Machined Hardware Source.

]]>

This is a special to print part we sell to an aerospace customer on an as-released purchase order basis, with the releases at approximately 600 pieces.  Made in the USA, this 1/72 machine screw nut is DFAR compliant and was made using 303 stainless steel with 3B thread fit.  Typically lead time from order is approximately 4 weeks.

The post Custom 1/72 Hex Machine Screw Nut Made to Print appeared first on Machined Hardware Source.

]]> 4898 Specialty 50FM-172 1/72 Flexlock Nuts https://www.machinedhardwaresource.com/portfolio/specialty-50fm-172-1-72-flexlock-nuts/ Wed, 03 Apr 2019 16:40:30 +0000 https://www.machinedhardwaresource.com/?post_type=liquid-portfolio&p=4892 The post Specialty 50FM-172 1/72 Flexlock Nuts appeared first on Machined Hardware Source.

]]>

This is a special flex lock hex nut with a locking machined shoulder we supply to our aerospace customer on a 12 month blanket as-released purchase order basis.  It is made in the USA in plain 303 stainless steel material and we supply it with full documentation, including signed C of C, DFAR material cert, and dimensional test report.  Our internal part number for this item is 50FM-172.

The post Specialty 50FM-172 1/72 Flexlock Nuts appeared first on Machined Hardware Source.

]]> 4892